Fujitsu ORACLE M10-1 Installation Manual page 12

Table 1-1 Workflow for the SPARC M10-1 (continued)
Step (work time (*1)) Work description
2 Before installing the system, check
the safety precautions, system
specifications, and necessary
conditions for installation.
3 Prepare the necessary tools/
information for installation.
4 Confirm the delivered components.
5 Install the rack.
6 Mount the SPARC M10-1 in the rack.
7 If there is a PCI expansion unit,
mount it in the rack.
8 If there are optional components,
mount them on the SPARC M10-1 or
PCI expansion unit.
9 Connect serial cables, LAN cables,
and power cords to the SPARC
M10-1.
10 If there is a PCI expansion unit,
connect the link cable and
management cable to the PCI
expansion unit.
Attach the core to the power cord,
and connect the power cord to the
power supply unit.
Initial diagnosis (approx. 30 minutes)
11 Connect the system management
terminal to the SPARC M10-1, and
turn on the input power.
12 Log in to the XSCF of SPARC M10-1,
and check the firmware version
number, altitude setting, and time
setting.
Fujitsu M10-1/SPARC M10-1 Installation Guide ･ March 2019
2
Reference
"Chapter 2 Planning and Preparing
for System Installation"
"3.1 Preparing the Necessary
Tools/Information for Installation"
"3.2.1 Confirming the delivered
components of the SPARC
"3.2.2 Confirming the delivered
components of the PCI expansion
unit"
See the manual for each rack.
"3.3 Confirming the Rack"
"3.4.1 Mounting the SPARC M10-1
in a rack"
"3.4.2 Mounting the PCI expansion
unit in a rack"
"3.5.1 Mounting optional
components in the SPARC
Fujitsu M10/SPARC M10 Systems PCI
Card Installation Guide
"Chapter 1 PCI Card Mounting
Rules for the SPARC M10-1"
"3.5.2 Mounting optional
components in the PCI expansion
unit"
"4.1 Connecting Cables to the
SPARC M10-1"
"4.2 Connecting Cables to the PCI
Expansion Unit"
"5.1 Connecting the System
Management Terminal to the
"5.2 Turning On the Input Power
and Starting the XSCF"
"5.3 Logging In to the XSCF"
"5.4 Checking the XCP Version"
"5.5 Checking the Altitude
"5.6 Checking the Time
Required
Required
Required
M10-1"
Option
Required
Required
Option
Optional
M10-1" (*3)
Optional
(*3)
Required
Optional
(*4)
Required
Chassis"
Required
Setting"
Setting"