Workflow For The Sparc M10-1 - Fujitsu ORACLE M10-1 Installation Manual

Chapter 1
Understanding the Installation Flow
This chapter describes the required workflows for installation of the SPARC M10-1
and PCI expansion unit, broken up into the following sections.
For the overview, configuration, and specifications of the SPARC M10-1 and PCI
expansion unit, see the Fujitsu M10/SPARC M10 Systems Quick Guide.

Workflow for the SPARC M10-1

■
Workflow for Installing the PCI Expansion Unit
■
1.1 Workflow for the SPARC M10-1
The SPARC M10-1 is a 1U-size chassis with 1 CPU (8 or 16 cores). This compact
model combines a space-saving design and high performance.
This section describes the workflow from installing the SPARC M10-1 and PCI
expansion unit to making the initial system settings. The PCI expansion unit will be
connected with optional components to the SPARC M10-1.
The initial system settings are the settings implemented before system startup, and
they include the XSCF setup and CPU Activation setting. Skip the steps for the PCI
expansion unit if it is not to be installed.
By clicking a reference enclosed in " " to display a section, you can see the details of
the respective step. Italic font is used to indicate the name of a reference manual other
than this manual.
Table 1-1 Workflow for the SPARC M10-1
Step (work time (*1)) Work description
Installation work (approx. 36 minutes (*2))
1 Check the latest information
available in the Fujitsu M10/SPARC
M10 Systems Product Notes.
Reference
Fujitsu M10/SPARC M10 Systems
Product Notes
Required
1