Fujitsu ORACLE M10-1 Installation Manual page 139

Table B-1 XSCF setup command examples (continued)
XSCF command example
console -p 0
poweroff -a
showpparprogress -p 0
Saving configuration information
ldm add-spconfig
ldm_set1 (*2)
dumpconfig file:///media/
usb_msd/backup-file.txt
or
dumpconfig ftp//<ftp_
server>/backup/backup-
sca-ff2-16.txt
*1 If you execute the setdate command after setting the altitude, you can skip rebootxscf because the XSCF is automatically reset after the
command is executed.
*2 The ldm add-spconfig command is a command of Oracle VM Server for SPARC.
Description
Connects to the control domain
console of a physical partition (PPAR)
Stops a physical partition
Displays the physical partition status
Saves logical domain configuration
information after a logical domain
configuration change
Example: It is saved with the file
name ldm_set1.
Saves XSCF setting information to a
USB device
or
Saves it via a network
Mandatory? Linked section
Yes "6.13 Starting and Stopping a
Physical Partition
Yes "6.13 Starting and Stopping a
Physical Partition
Yes "6.13 Starting and Stopping a
Physical Partition
Yes "6.14.1 Saving logical domain
configuration
Yes "6.14.2 Saving XSCF setting
information"
Appendix B Setup Command Workflow
(PPAR)"
(PPAR)"
(PPAR)"
information"
129