Fujitsu ORACLE M10-1 Installation Manual page 5

5.3 Logging In to the XSCF 81
5.4 Checking the XCP Version 82
5.5 Checking the Altitude Setting 82
5.6 Checking the Time Setting 83
5.7 Performing a Diagnosis Test 85
5.8 Checking the Component Status 86
Chapter 6 Making the Initial System Settings 89
6.1 Setting the Password Policy 89
6.2 Setting a User Account and Password 92
6.3 Configuring the Telnet/SSH Service 94
6.3.1 Configuring the Telnet service 94
6.3.2 Configuring the SSH service 95
6.4 Configuring the HTTPS Service 96
6.5 Configuring the XSCF Network 97
6.5.1 Setting an XSCF host name and domain name 98
6.5.2 Setting an Ethernet (XSCF-LAN) IP address 99
6.5.3 Setting the routing 99
6.5.4 Applying network settings 100
6.6 Configuring Memory Mirroring 101
6.7 Creating a Physical Partition Configuration List (PCL) 102
6.8 Confirming That a System Board (PSB) is Assigned to a Physical
Partition (PPAR) 104
6.9 Setting a CPU Operational Mode for the Physical Partition 104
6.10 Synchronizing the Physical Partition (PPAR) Time and XSCF Time
106
6.11 Registering a CPU Activation Key 107
6.11.1 CPU Activation key application conditions 107
6.11.2 Checking a CPU Activation key 107
6.11.3 Registering a CPU Activation key 108
6.12 Assigning CPU Core Resources to a Physical Partition 110
6.13 Starting and Stopping a Physical Partition (PPAR) 111
Contents v