2.3.1
Size and weight
Table 2-2
Table 2-2 Physical specifications of each chassis
Item
Height
Width
Depth
Weight
2.4
Confirming Rack Specifications
Use a rack that meets the specified conditions for using the SPARC M10-1 or the PCI
expansion unit.
This section describes the items that must be confirmed to use a rack
2.4.1
Mounting conditions for general racks
The SPARC M10-1 is designed for mounting in an equipment rack.
For mounting in a third-party rack, it is the customer's responsibility to confirm that
the rack specifications match the specifications and requirements for the SPARC M10
systems (see
Fujitsu M10-1/SPARC M10-1 Installation Guide ・ March 2019
14
lists the size and weight of each chassis.
SPARC M10-1
42.5 mm (1.7 in.) (1U)
431 mm (17.0 in.)
721 mm (28.4 in.)
18 kg
Figure 2-2
and
Table
PCI expansion unit
86 mm (3.4 in.) (2U)
440 mm (17.3 in.)
750 mm (29.5 in.)
22 kg
2-3).