Workflow For Installing The Pci Expansion Unit - Fujitsu ORACLE M10-1 Installation Manual

Table 1-1 Workflow for the SPARC M10-1 (continued)
Step (work time (*1)) Work description
28 Save XSCF setting information and
logical domain configuration
information.
*1 Average work time
*2 Time required for mounting optional components and installing the PCI expansion unit is not included.
*3 If the optional components are ordered together with the SPARC M10-1, they are shipped mounted to the SPARC M10-1. If the PCI
expansion unit is also ordered, the optional components are shipped mounted to the PCI expansion unit.
*4 The link card is shipped mounted to the SPARC M10-1.
*5 The physical partition configuration information is already set.
*6 One CD-ROM disk containing a CPU Activation certificate is provided with the system. The CPU Activation key may be registered
with the system.
*7 If you have started Oracle Solaris and changed the configuration of a logical domain, save the logical domain configuration.
Note - The SPARC M10 systems have Oracle Solaris preinstalled. According to the purpose,
either use the preinstalled Oracle Solaris as is or reinstall it.
To reinstall Oracle Solaris, install the latest Oracle VM Server for SPARC. For the latest
information on the supported Oracle Solaris versions and SRU, see the Fujitsu M10/SPARC
M10 Systems Product Notes.
1.2 Workflow for Installing the PCI
Expansion Unit
The PCI expansion unit is a 2U chassis with 11 PCI slots, and it can connect to the
SPARC M10-1. Special attention must be paid to the installation location and the
number of link cards that can be installed for the SPARC M10-1 when the PCI
expansion unit is installed in the SPARC M10-1. Install link cards according to the
Table 1-2
Table 1-2 SPARC M10-1 link card installation rule
Maximum installable number
2
Note - For details on the link card installation rule, see "Chapter 1 PCI Card Mounting
Rules for the SPARC M10-1" in the Fujitsu M10/SPARC M10 Systems PCI Card Installation
Guide.
This section describes the workflow from installing the PCI expansion unit to
checking the component status when the PCI expansion unit is installed while the
Fujitsu M10-1/SPARC M10-1 Installation Guide ･ March 2019
4
rules.
Reference
"6.14 Saving Configuration
Information"
Link card installation location
PCI#0
PCI#1
Required
(*7)