Chapter 1 Understanding The Installation Flow - Fujitsu ORACLE M10-1 Installation Manual

Table 1-1 Workflow for the SPARC M10-1 (continued)
Step (work time (*1)) Work description
13 Perform an initial diagnosis test on
the physical system board (PSB).
14 Check the status of mounted
components.
Initial system settings (approx. 50 minutes)
15 Set the password policy.
16 Set a user account and password.
17 Configure the telnet or SSH service.
18 Configure the HTTPS service.
19 Configure the XSCF network.
20 When duplicating memory,
configure memory mirroring.
21 Set the configuration policy for a
physical partition.
22 Confirm that the system board (PSB)
is assigned to a physical partition
(PPAR).
23 Set a CPU operational mode for the
physical partition.
24 Clear the difference between the
system time and physical partition
(PPAR) time.
25 Register a CPU Activation key to the
XSCF.
26 Assign CPU resources to the
physical partition.
27 Confirm the start/stop of the
physical partition and the
connection of the console.
Reference
"5.7 Performing a Diagnosis
"5.8 Checking the Component
Status"
"6.1 Setting the Password
"6.2 Setting a User Account and
Password"
"6.3 Configuring the Telnet/SSH
Service"
"6.4 Configuring the HTTPS
Service"
"6.5 Configuring the XSCF
Network"
"6.6 Configuring Memory
Mirroring"
"6.7 Creating a Physical Partition
Configuration List (PCL)"
"6.8 Confirming That a System
Board (PSB) is Assigned to a
Physical Partition (PPAR)"
"6.9 Setting a CPU Operational
Mode for the Physical Partition"
"6.10 Synchronizing the Physical
Partition (PPAR) Time and XSCF
Time"
"6.11 Registering a CPU Activation
Key"
"6.12 Assigning CPU Core
Resources to a Physical Partition"
"6.13 Starting and Stopping a
Physical Partition (PPAR)"
Chapter 1 Understanding the Installation Flow
Test" Required
Required
Policy" Required
Required
Required
Required
Required
Option
Optional
(*5)
Option
Option
Required
Required
(*6)
Required
Required
3