Figure 3-23 Attaching the Type-2 rail: Locations of protrusions
Mounting area
(2U)
FRONT
Figure 3-24 Attaching the rail: Fixing location of the screw
2U bottom
FRONT
6.
Attach the cable support fixing brackets to the rear supporting columns of the
rack.
For the Type-1 cable support
a. Orient the notches (B in
Figure
3-25) face down.
b. From the rear of the rack, secure the rails and cable support brackets with two
M6 screws to the rear supporting columns of the rack.
2U top
1U top
REAR
FRONT
Figure
3-25) on the cable support fixing brackets (A in
Chapter 3 Installing the System
Mounting area
(2U)
REAR
57