11.3.2
Parameter setting
(1) Setting the network parameters and automatic refresh parameters of the
master station
Set the network parameters and automatic refresh parameters as follows.
Refer to
(3) for the station information setting.
Refer to
● Do not set the same refresh devices as the following.
• Refresh parameters of modules on the network
• I/O numbers used for I/O modules and an intelligent function module
• Auto refresh settings of an intelligent function module
● To set X or Y as a refresh device, set a unique I/O number used for I/O modules and an intelligent function module.
276
Page 277, Section 11.3.2 (2) for the operation setting. Refer to
Page 278, Section 11.3.2 (4) for the remote device station initial setting.
Page 277, Section 11.3.2
Refer to Section 11.3.2 (2).
Refer to Section 11.3.2 (3).
Refer to Section 11.3.2 (4).