Mitsubishi Electric L26CPU-BT User Manual page 141

Data link status
When a The GX Works2
communication data link faulty
error (power off, station is set
etc.) occurs in a (local station
local station setting)
*1 If parameter setting has been made using the dedicated instructions, the data is held. If parameter setting has been
made using GX Works2, the data is clear when the RY refresh device is set to Y, the data is cleared or held when the RY
refresh device is set to other than Y. (Refer to
*2 When Y is set to the refresh device of the remote output (RY) in the local station that has stopped, only the receive area
from the stopped local station is cleared. The data is held or cleared according to the parameter settings when the
device other than Y is set. (Refer to
Operation continues for the receive areas from other stations.
Remote device station, intelligent
device station
Remote Remote Remote
input output register
(RX) (RY) (RWw)
Clear
Continue Continue Continue
Hold
Page 134, Section 8.2.5.)
Local station, standby master station
(acting as a local station)
Remote Remote
Remote
register input
output (RY)
(RWr) (RX)
Clears the
receive area
from a local
station with a
communication
error
Continue Continue
Retains the
receive area
from a local
station with a
communication
error
Page 134, Section 8.2.5.)
CHAPTER 8 FUNCTIONS
Remote Remote
register register
(RWw) (RWr)
Retains the
receive area
from a local
Continue
station with a
communication
error
139
8