Mitsubishi Electric L26CPU-BT User Manual page 464

(2) How to set the temporary error invalid station
Set the [Diagnostics]
temporary error".
Place the cursor at the station to be set as a temporary error invalid station and click "Setting/Cancel".
(3) How to set the data link stop/restart
Set the [Diagnostics]
(a) Specifying applicable module
Specify the module whose data link is stopped or restarted in "Module setting".
Specification method: Module No., I/O Address
(b) Execution of data link stop/restart
Perform these operations by setting "Start Data Link" or "Stop Data Link" in the network test.
462
[CC-Link / CC-Link/LT Diagnostics]
[CC-Link / CC-Link/LT Diagnostics].
"Monitoring other station ..." "Invalid station if