Number
Name
Terminal block
2)
3)
Serial No. display part
4)
Module joint lever
5)
DIN rail hook
24
A CC-Link dedicated Ver.1.10 compatible cable is connected for data linking.
For the connection method, refer to
Terminals SLD and FG are connected inside the module.
Since a 2-piece type terminal block is used, the module can be replaced without disconnecting
the signal lines to the terminal block.
(Shut off the external power supply for the system in all phases before replacing the module.)
Displays the serial No. of the rating plate.
Fixes the connected modules.
Used to install the module to the DIN rail.
Description
Page 62, Section 6.3.