G(P).Rird - Mitsubishi Electric L26CPU-BT User Manual

9.1.2

G(P).RIRD

The G(P).RIRD instruction reads the specified points of data from the buffer memory or the programmable controller
CPU device of the specified station.
Set Internal device
data (System, user)
Bit Word
(S) 

(D1)
(D2) 
[Instruction [Execution
symbol] condition]
G.RIRD
GP.RIRD
Set data
*1
Device
Start I/O number of the module
Un
(First 2 digits of I/O No. with three digits)
(S) Start number of the device in which control data is stored.
(D1) Start number of the device to which read data is to be stored.
Device that is turned ON for one scan upon completion of reading.
(D2)
(D2) + 1 also turns ON at an abnormal completion.
*1 The file register of each of the local device and the program cannot be used as a device for setting data.
Link direct
device
File
J\
register
Bit Word


Command
Command
Description
CHAPTER 9 DEDICATED INSTRUCTIONS AND PROGRAMMING
Usable devices
Intelligent
function module Index register
device Z
U\G



G.RIRD Un (S)
GP.RIRD Un (S)
Setting range
Within the range of the
specified device
Within the range of the
specified device
Within the range of the
specified device
Constant
Other
K, H $
 
 
 
(D1) (D2)
(D1) (D2)
Data type
0 to FE
Binary 16 bits
H
Device name
Bit
9



193