Expanded Cyclic Setting - Mitsubishi Electric L26CPU-BT User Manual

3.4.1

Expanded cyclic setting

When increasing the number of link points, select the remote net ver.2 mode or the remote net additional mode.
(1) Remote net ver.2 mode
This mode is designed to configure a new system.
The number of link points can be increased as indicated below.
• Per station, RX/RY can be increased to up to 128 points and RWw/RWr to up to 32 points.
• Per CC-Link network, RX/RY can be increased to up to 8192 points and RWw/RWr to up to 2048 points.
Master station
Ver.2 mode
Ver. 2
Station number 1
compatible
Station number 2
remote
output RY
Station number 3
Station number 4
Station number 5
Station number 6
Station number 7
to
● In the remote net ver.2 mode, the remote registers of the remote I/O station are set to 0 points.
● When the ver.2 compatible device station is added or deleted, the refresh devices of the programmable controller CPU
will vary by the number of points set to the added or deleted device station in the device stations of the station numbers
after the added or deleted device station. Confirm the varying number of points in
Remote device station
Remote I/O station Ver. 2 compatible
(Station number 1: (Station number 2:
Occupies 1 station)
Occupies 1 station)
Output
Remote output RY
quadruple
CHAPTER 3 SPECIFICATIONS
Local station
Remote device station
Ver.2 mode
Ver. 2 compatible
(Station number 3: (Station number 7:
Occupies 4 stations)
Occupies 1 station)
Remote input RX
Station number 1
Station number 2
Station number 3
Station number 4
Station number 5
Station number 6
Remote output RY
Station number 7
to
double
Page 28, Section 3.2 (1).
3
octuple
37