Mitsubishi Electric L26CPU-BT User Manual page 189

(2) Precautions
(a) Precautions when executing data link stop/restart
• Do not write to buffer memory address 5E0
• Do not execute at one time by programs and other peripherals.
If executing at one time, data link stop/restart may not operate normally.
(b) If executing "Stop Data Link" at the master station when GX Works2 is connected to
a local station as the following system configuration, data link in the whole system
stops and the transmission from GX Works2 to the master station cannot be
operated via CC-Link.
To restart the transmission from GX Works2, reset the programmable controller CPU of the data link stop
station and restart data link.
Master station: 0
Reset this programmable controller CPU.
.
H
Local station: 1
CC-Link
GX Works2
CHAPTER 8 FUNCTIONS
187
8