Differences Between Multi Program 2 Mode And Standard Mode - Sony MVS-8000SF User Manual

• For cross-point button link settings, M/E-1 to M/E-3, and P/P "Sub
Program," "Sub Preset," and "Sub Trans PGM" have been added to the link
source bus.
• Snapshot attributes can now be set independently for main and sub.
• There are additional menus for sub which can be recalled by pressing a
button twice.
• You can set [MP2 Auto Correct] to On or Off in the Effect menu or Snapshot
menu. When this is set to On, for example, copy destination and source data
is automatically recognized as main or sub, and the data interchanged.
• When the key adjustment mode is selected on the Multifunction Flexi Pad (or
when the KEY ADJ button is lit), if you select the region selection button to
which [M/E-x Sub] is assigned, the [TRNS] button operates as a button for
the sub region.
Differences Between Multi Program 2 Mode and
Standard Mode
The differences from operation in standard mode are as follows.
Item
Keys
Wipes
(background)
Wipes (key)
420
Multi Program 2
Main
a) Keys 1 to 4 can be used
Patterns Same as standard mode
Modifiers Same as standard mode
Same as wipes (background) for sub
Sub
Keys 2 to 4 only can be
used
• Only standard patterns
can be used
• Pattern mix is not
possible
• Pairing, modulation,
spring, spiral, and split
cannot be used
• Edge fill mattes are
single-color only
• Replication can be
selected from four
patterns