Knob
1
2
3
4
5
a) Shared with knob 3 for parameter group 1
b) The horizontal center position of the video pasted on Side H. At –100.00 the center is at the left
edge of the screen, and at +100.00 the center is at the right edge of the screen.
c) The vertical center position of the video pasted on Side H. At –100.00 the center is at the bottom
edge of the screen, and at +100.00 the center is at the top edge of the screen.
Setting DME Wipe Modifiers
You can apply various modifiers to the DME wipe pattern: setting the DME
wipe direction, pattern position, and so on.
For an overview of the DME wipe modifiers, see "DME Wipe Pattern
Variation and Modifiers" (page 270).
Specifying the DME wipe direction (Direction)
You can specify the DME wipe direction (normal/reverse).
To specify the DME wipe direction in a menu
1
In the M/E-1 >DME Wipe menu, select HF4 'Edge/Direction.'
The Edge/Direction menu appears.
2
In the <Direction> group, specify the DME wipe direction.
Normal: regular direction
Normal/Reverse: alternate between regular and reverse for each transition
Reverse: reverse direction to normal
Parameter group [2/2]
Parameter
Adjustment
Side H Size X
Side H horizontal
magnification
Side H Size Y
Side H vertical
magnification
Height
Height of brick
Side H Center X
Side H horizontal center
position
Side H Center Y
Side H vertical center
position
Setting values
0.01 to 8.00
0.01 to 8.00
0.01 to 100.00
–100.00 to +100.00
–100.00 to +100.00
Basic Procedure for DME Wipe Settings
a)
b)
c)
277