Key Modify Clear; Blink Function - Sony MVS-8000SF User Manual

Hide thumbs Also See for MVS-8000SF:

Table of Contents

You cannot select the PROC V and PROC K signals using the cross-point

selection buttons of the M/E or PGM/PST bank.

Using the key processed keyer signals or signals to which a DME

effect is applied in frame memory (frame memory feed)

To use the key processed keyer key fill and key source signals on the frame

memory source buses, in the Processed Key menu, press [FM Feed]. [Ext Proc

Key] turns on, and the key fill and key source signals processed on the

currently selected keyer are automatically assigned to frame memory source

buses 1 and 2. When a DME is selected on the keyer, the key fill and key source

signals to which a DME effect is applied are assigned.

Key Modify Clear

A simple button operation or a menu operation returns the key settings to the

initial status settings.

Press [Default Recall] at the lower left of the menu display, turning it on, then

press the corresponding VF button (VF1 to VF4) to return the key settings to

their initial status.

For details of the initial status, see "Selecting the State After Powering On

(Start Up Menu)" in Chapter 18 (Volume 3).

For the menu operation to return the key state to that set in initial status, see

"Returning to default state in function groupings" (page 96).

With the blink function, you can obtain the following effects.

Key blink: The key is alternately inserted and deleted at regular intervals. You

Edge blink: The key fill and key edge fill signals are interchanged at regular

The blink settings are in the Transition menu for each key.

Using the blink function

For example, to make the required settings for key 1 on the M/E-1 bank, use

the following procedure.

Key Setting Operations Using Menus

can set the period of blinking, and the proportion of each cycle for which

the key is inserted.

intervals. You can set the period of blinking, and the proportion of each

cycle for which the original state holds.