Video Processing - Sony MVS-8000SF User Manual

1
In the M/E-1 >Key1 menu, select HF6 'Transition.'
The Transition menu appears.
2
In the <Blink> group, select [Key Blink] or [Edge Blink] to set it on.
3
Set the blink parameters.
• When key blink is selected
Knob
1
2
• When edge blink is selected
Knob
1
2

Video Processing

You can adjust the luminance and hue of the selected key fill signal.
For example, to apply video processing to the signal selected on the M/E-1
bank key 1 fill bus, use the following procedure.
1
In the M/E-1 >Key1 menu, select HF7 'Video Process.'
The Video Process menu appears.
2
Press [Video Process], turning it on.
3
Adjust the following parameters.
Knob
1
2
3
4
5
Parameter Adjustment
Blink Rate Length of blink cycle
Duty Proportion of cycle for which key
inserted
Parameter Adjustment
Blink Rate Length of blink cycle
Duty Proportion of cycle for which
original state holds
Parameter Adjustment
Video Gain Video gain
Y Gain Luminance gain
C Gain Chrominance gain
Hue Delay Hue delay
Black Level Luminance black level
Setting values
1 to 100
0.00 to 100.00
Setting values
1 to 100
0.00 to 100.00
Setting values
–200.00 to +200.00
–200.00 to +200.00
–200.00 to +200.00
–180.00 to +180.00
–7.31 to +109.59
Key Setting Operations Using Menus
195