Setting The Effect Duration - Sony MVS-8000SF User Manual

Hide thumbs Also See for MVS-8000SF:

Table of Contents

The time from this keyframe to the following keyframe is what you set.

Press the [KF DUR] button, turning it on.

The display in the numeric keypad control block shows "KF DUR"

followed by the duration of the current keyframe (seconds:frames).

Using the numeric keypad in the numeric keypad control block, enter the

timecode value for the keyframe duration, as a maximum of four digits.

For example, to set 9 seconds and 20 frames, enter 920. You can also use

the [TRIM] button to enter a difference value. (See "To enter a difference

value" (page 742).)

Press the [ENTER] button to confirm the entry.

This changes the keyframe duration to the new setting.

In addition to the above operation, the keyframe duration may also be

automatically changed as a result of changing the effect duration. (See the

next section.)

Setting the Effect Duration

To set the effect duration, use the following procedure.

Press the [EDIT ENBL] button, turning it on.

Press the [EFF DUR] button, turning it on.

The display in the numeric keypad control block shows "DUR" followed

by the effect duration (minutes:seconds:frames).

Using the numeric keypad in the numeric keypad control block, enter the

timecode value for the effect duration, as a maximum of six digits.

For example, to set 3 minutes 7 seconds and 15 frames, enter 30715. You

can also use the [TRIM] button to enter a difference value.(See "To enter

a difference value" (page 742).)

Press the [ENTER] button.

This changes the effect duration to the new setting.

Time Settings