Example 1: Assigning M/E-1 main and sub to a single switcher bank, and
Example 2: Assigning separate switcher banks as "M/E-1 main dedicated" and
Video creation operations in Multi Program 2 mode
For each of main and sub, there are differences from the operations in standard
mode.
For details, see "Differences Between Multi Program 2 Mode and Standard
Mode" (page 420).
Sequence of Operations in Multi Program 2
Basic operation sequence
Enter the BZS-8200 install key (first time only)
↓
Set Multi Program 2 operating mode for each switcher bank
↓
Assign output signals, and set the background configuration, key
configuration, and key preview configuration
410
Multi Program 2
switching between them
Used switched between M/E-1 main and sub
"M/E-1 sub dedicated"
Used for M/E-1 main operations
Used for M/E-1 sub operations