Sony MVS-8000SF User Manual page 643

To select Surface Flat
Press [Surface Flat], turning it on.
If you have selected anything other than Flat in the <Surface Select> group of
the Spot Lighting menu, the part corresponding only to the surface being struck
by the currently set light from the light source is shown in the same way as if
Flat had been selected.
To set the shape of the light
1
Press [Shape], turning it on.
2
Set the following parameters.
• SD format
Knob Parameter
1 Shape Ptn
2 Size
3 Deform
4 Soft
5 Angle
a) For more information about the shape patterns, see "Shape Patterns" (page 909) in the
Appendix.
b) 0 is a round shape, and 100 is the shape itself. Smaller values make the pattern more
rounded.
c) –1.00 is one rotation in the counterclockwise direction. +1.00 is one rotation in the
clockwise direction.
• HD format
Knob Parameter
1 Shape Ptn
2 Size
3 Deform
4 Soft
5 Angle
a) For more information about the shape patterns, see "Shape Patterns" (page 909) in the
Appendix.
b) 0 is a round shape, and 100 is the shape itself. Smaller values make the pattern more
rounded.
c) –1.00 is one rotation in the counterclockwise direction. +1.00 is one rotation in the
clockwise direction.
To rotate the shape pattern
1
Press [Shape Speed], turning it on.
Adjustment
Shape pattern
Shape size
Amount of shape deformation
Softness of shape pattern
Angle of shape pattern rotation
Adjustment
Shape pattern
Shape size
Amount of shape deformation
Softness of shape pattern
Angle of shape pattern rotation
Setting values
a)
1 to 2
0.00 to 6.00
b)
0.00 to 100.00
0.00 to 100.00
c)
–8.00 to +8.00
Setting values
a)
1 to 2
0.00 to 24.00
b)
0.00 to 100.00
0.00 to 100.00
c)
–8.00 to +8.00
DME Special Effect Operations
643