Sony MVS-8000SF User Manual page 421

Item
DME wipes Use
Patterns for 1
channel
Patterns for 2
channels
Patterns for 3
channels
Backgrounds Wipe edge fill matte
Modifiers
Transitions Key priority
Transition
preview
Preset color
mix
Snapshots Cross-point
hold
Control from an editor
Operation setting for
switcher GPI inputs and
outputs
a) Keys 2 to 4 are common to main and sub.
Notes
• Allow a transition to complete before carrying out main and sub delegation
switching.
• The sub background A bus (utility 2 bus) is shared with wipe edge border fill.
Making a change to one affects the other.
• Even if the wipe border width is set to the same numeric value for main and
sub, the same image is not obtained.
• Changing the position of the wipe pattern for sub also changes the pattern
size.
Main
Can be used
For a dedicated interface, each of main and sub can be
used.
For the SDI interface, only one of main and sub can be
used.
Only one of main and sub can be used
(For each M/E, the number of DMEs that can be used is
the same as in standard mode.)
(including color mix and
other settings in the Matte
Adjust menu)
Same as standard mode
Cannot be used
Cannot be used
Color matte or video signal
selected on the utility 2 bus
Utility 2 cannot be set
Same as standard mode
Same as standard mode
Sub
Cannot be used (Can be
used, with a setting
change)
Wipe edge fill matte
(single-color only)
Wipe border colors are
single-color only
Color matte only
Utility 3 is added. BKGD
A/B and Key1 cannot be
set.
Cannot be used
Cannot be used
Multi Program 2
421