Sony MVS-8000SF User Manual page 507

Hide thumbs Also See for MVS-8000SF:

Table of Contents

Function assignment buttons

Buttons used when the three-dimensional transform operation

mode is enabled

LOCAL: Enable operations in the DME local coordinate space.

GLB (global): Enable operations in the DME global coordinate space.

The [LOCAL] and [GLB] buttons can be selected at the same time.

SRC (source): Enable operations in the DME source coordinate space.

TRGT (target): Enable operations in the DME target coordinate space.

The [SRC] and [TRGT] buttons cannot be selected at the same time. When

these buttons are held down, trackball and Z-ring operation is switched to

a finer control. (fine mode)

AXIS LOC (location): When this button is lit, the trackball moves the

rotational axis of the image in the x-axis and y-axis directions, and the Z-

ring moves the axis in the z-axis direction.

ASP PERS (aspect/perspective): When the [SRC] button is lit, pressing this

button enables the trackball to control the x-axis and y-axis directions

independently, and the Z-ring controls the x-axis and y-axis directions

together, to vary the aspect ratio. When the [SHIFT] button is held down

and this button is pressed, the trackball controls the skew of the image in

the x-axis and y-axis directions.

Region selection buttons (DME1 to 8)

Operating buttons

Device control block (MKS-8031TB)

Three-Dimensional Transformation Operations