Sony MVS-8000SF User Manual page 325

Knob Parameter
5 Register
Notes
To search for an empty register in the user region, use the numeric keypad
control block (see step 3 of "Recalling a Register" in Chapter 13 (Volume
2)).
5
Use the arrow keys or turn the knobs to scroll the thumbnail display of the
files.
Knob Parameter
1 Scroll
6
Select the thumbnail of the files to be used for the keyframe.
7
If necessary, turn the knob to check the animation effect in the thumbnail
display.
Knob Parameter
3 Viewer
8
Using the region selection buttons in the numeric keypad control block,
select one of the regions (User1 to User8) to which the frame memory
output signals have been assigned.
9
Carry out either of the following.
• To clear the effect register selected in step 4, and create a new effect:
press [Create Key Frame].
• To add to the end of the effect register selected in step 4, press [Append
Key Frame].
A confirmation message for creating the effect appears.
If there is an inappropriate condition for creating the effect, an error
message appears.
For details of error messages, see "Error Messages" in the Appendix
(Volume 3).
10
Press [OK].
This creates the effect in the selected user region register.
Adjustment
Effect register number
Adjustment
Thumbnail display
scrolling
Adjustment
Animate thumbnail display
of files
Setting values
1 to 99
Setting values
1 and upwards
Setting values
00:00:00 and upwards
325
Still Image Operations