Wipe Settings For Independent Key Transitions; Basic Procedure For Independent Key Transition Wipe Settings - Sony MVS-8000SF User Manual

Hide thumbs Also See for MVS-8000SF:

Table of Contents

Wipe Settings for Independent Key

You carry out independent key/downstream key transition wipe setting

operations using the Wipe Adjust menu for each keyer.

For an overview of independent key transitions, see "What is an independent

key transition?" (page 152).

This section describes the independent key transition wipe settings, taking the

M/E-1 >Key1 >Transition >Wipe Adjust menu as an example.

Basic Procedure for Independent Key Transition Wipe

Accessing the independent key transition wipe settings menu

As an example, to access the M/E-1 >Key1 >Transition >Wipe Adjust menu,

carry out the following operation.

• In the menu control block, select the top menu selection button [M/E 1] and

select VF1 'Key1' and HF6 'Transition' to display the Transition menu for

key 1, then press [Wipe Adjust].

Carrying out the above operation displays the M/E-1 >Key1 >Transition

>Wipe Adjust menu (which will be referred to below as simply the Key1 Wipe

Adjust menu).

Selecting the independent key transition wipe pattern

You select the independent key wipe pattern from the list of patterns displayed

in the menu.

In an independent key transition, you can only use the standard wipe patterns

(pattern numbers 1 to 24).

To select a wipe pattern for independent key1 on the M/E-1 bank, use the

following procedure.

Wipe Settings for Independent Key Transitions

In the Key1 Wipe Adjust menu, select [Pattern Select].