Secondary Color Correction Operations - Sony MVS-8000SF User Manual

Secondary Color Correction Operations

For the six colors R (red), G (green), B (blue), Y (yellow), C (cyan), and M
(magenta), adjust the luminance and saturation, and also the hue within a range
of ±30 degrees of the center value for each color.
You can mask a part of the region to be corrected.
Notes
When spot color adjustment is enabled in the setup settings, this function is
disabled. On the MVS-8000G, secondary color correction and spot color
adjustment can be enabled at the same time.
For details, see "Switching the Color Correction Function" in Chapter 18
(Volume 3).
Applying secondary color correction
1
In the CCR menu, press VF1 'CCR1' and HF3 'Secondary CCR.'
The Secondary CCR menu appears.
2
In the <Secondary CCR> group, press [Secondary CCR], turning it on.
3
In the <Secondary CCR Adjust> group, select the color for which you
want to make the setting.
4
Adjust the following parameters.
Knob
1
2
3
To return the parameter settings to their default values
In the <Secondary CCR> group press [Unity].
Masking a part of the secondary color correction
In the <Secondary Mask> group, press [Mask1] or [Mask2], turning it on, then
carry out the same operation as described under "Masking a part of the primary
color correction" (page 390).
Parameter Adjustment
Luminance Luminance
Saturation Saturation
Hue Delay Hue delay
Setting values
–100.00 to +100.00
0.00 to 200.00
–180.00 to +180.00
Color Corrector Functions
393