Setting The Run Mode - Sony MVS-8000SF User Manual

Executing an effect automatically
1
2
3
Executing an effect manually
In step 3 above, operate the fader lever.
To use the transition control block fader lever as a keyframe fader
Press the [KF] button in the transition control block, turning it on, to execute a
keyframe effect with the fader lever in the same control block.
You can also assign the [KF] button to a transition type selection button in the
transition control block.
For the operation of assigning the [KF] button to the transition type selection
buttons, see "Overall Control Panel Settings (Config Menu)" in Chapter 19
(Volume 3).
Notes
• It is not possible for the [KF] button to be on for multiple banks (M/E or
PGM/PST) at the same time. If you press the [KF] button in more than one
bank, only the last button pressed remains on.
• If a macro is assigned to the transition control block fader lever, then while
in use as a keyframe fader the macro is not executed.
Moving to the first keyframe of the effect
To move to the first keyframe of the effect, press the [REWIND] button.

Setting the Run Mode

You can set the run mode in which an effect is executed when you press the
[RUN] button.
764
Executing Effects
Select the region in which you want to execute the effect, using the region
selection buttons in the numeric keypad control block. (See "Recalling a
register from the numeric keypad control block" ().)
With the numeric keypad, enter the number of the register in which the
effect you want to execute is saved, and press the [ENTER] button to
confirm.
This recalls the effect saved in the register.
In the keyframe control block, press the [RUN] button.
The [RUN] button lights amber and the effect is executed automatically.