Sony MVS-8000SF User Manual page 814

Hide thumbs Also See for MVS-8000SF:

Table of Contents

Shotbox Execution

• The [RCALL] button lights amber.

• The display shows the last recalled register number.

With the numeric keypad buttons, enter the desired register number.

• The display now shows the entered register number.

• If the specified register is empty, an "E" automatically appears after the

Press the [ENTER] button.

• This runs the specified shotbox register.

• The number of the recalled register appears in the display.

• The region selection buttons corresponding to the regions for which the

effect is set light.

• If auto run is set for the specified shotbox register, on recall the effect is

immediately executed.

• If you recall an empty register, then shotbox execution has no effect.

When auto run is not set for the recalled register

Simply recalling the register does not run the effect. To do this, in the

keyframe control block, press the [RUN] button.