Auxiliary Bus Control Block - Sony MVS-8000SF User Manual

Auxiliary Bus Control Block

2 Bank selection buttons
a AUX delegation buttons
Press one of these buttons, turning it on, to
select the bus to assign to the key row of the
bank selected with the bank selection
buttons. These 10 buttons from left to right
have ID numbers 1 to 10. When the
[SHIFT] button is enabled, their ID
numbers switch to 11 to 20. Pressing one of
the buttons selects the bus assigned to the
ID number. That is, you can select up to 20
buses using these AUX delegation buttons
in combination with the [SHIFT] button.
The assignment of buses to the ID numbers
can be done in a Setup menu.
For buses that can be selected, see "Bus
Selection" (page 115).
For each bank, the key row is shared
between the auxiliary bus control block and
cross-point control block. Priority is given
to the control block in which the delegation
button is last pressed. When priority is
68
Names and Functions of Parts of the Control Panel
1 AUX delegation buttons
given to the cross-point control block, all
these buttons go off.
b Bank selection buttons
These select the bank for which the AUX
delegation buttons are enabled.
c KEY button
While this button is held down, you can use
the cross-point row of buttons to select key
signals.
d SHIFT button
While this button is enabled, the AUX
delegation buttons have the shifted ID
numbers. In a Setup menu, you can select
one of the following three modes for this
button.
• The button takes effect while being held
• Every time the button is pressed, it
3 KEY button
down.
toggles between the shifted and unshifted
states for the AUX delegation buttons.
4 SHIFT button