Key Setting Operations With the Key
Control Block
This section describes the basic procedures for key settings using the key
control block.
Key type selection buttons
Key fill/key source selection buttons
Operations in the Key Control Block
Parameter adjustment with the knobs
When the button for a function requiring parameter settings is pressed (that is,
on), you can set the parameters with the four knobs. If there are more than four
values to be assigned to the knobs, the [MORE] button lights amber. At this
point, press the [MORE] button, which turns green, to assign the fifth and
subsequent parameters to the knobs, so that the parameter settings can be made.
Key delegation buttons
M/E delegation buttons
Edge type selection buttons
MORE button
Displays
Knobs
Key Setting Operations With the Key Control Block
199