Sony MVS-8000SF User Manual page 610

To select the shape of the part beginning to melt
Press [Form] and set the following parameter.
Knob
1
a) 1 (SINE): Sine wave
2 (PARABOLA): Parabola wave
3 (TRIANGLE): Triangular wave
4 (RECTANGLE): Rectangular wave
5 (CIRCLE): Circular wave
6 (CUBIC): Cubic wave
7 (MELT1): Melting wave 1
8 (MELT2): Melting wave 2
To make the melting part stardust
1
2
Character Trail settings
You can set the effect starting position, the degree of expansion, the slant angle
of the effect region, and trail direction, the degree to which the image
disappears, the trail type and amount of stardust, and other parameters.
To apply the Character Trail effect
With the Character Trail menu displayed, set the following parameters.
Knob
1
2
3
4
a) Setting for SD 4:3, SD 16:9
b) Setting for HD 4:3, HD 16:9
610
DME Special Effect Operations
Parameter
Form
Press [Pixel], turning it on.
Set the following parameters.
Knob Parameter Adjustment
1 Density Degree to which image
disappears
2 Random Degree to which pixel positions
become more randomized
further from the center
Parameter Adjustment
Transition Position where effect starts
Expand Degree of expansion
Trans Angle Angle of slanting in effect region
Trail Angle Direction of trail
Adjustment
Waveform
Setting values
a)
1 to 8
Setting values
0.00 to 100.00
0.00 to 100.00
Setting values
a)
–8.000 to +8.000
b)
–32.000 to +32.000
0.00 to 100.00
–8.000 to +8.000
–100.00 to +100.00