Sony MVS-8000SF User Manual page 771

DME: indicate assignment of DME ch1 ("DME1"), ch2 ("DME2"), ch3
("DME3"), ch4 ("DME4"), ch5 ("DME5"), ch6 ("DME6"), ch7
("DME7"), and ch8 ("DME8").
DEV1-8: indicate assignment of Device1 ("DEV1"), Device2 ("DEV2"),
Device3 ("DEV3"), Device4 ("DEV4"), Device5 ("DEV5"), Device6
("DEV6"), Device7 ("DEV7"), and Device8 ("DEV8").
DEV9-12: indicate assignment of Device9 ("DEV9"), Device10
("DEV10"), Device11 ("DEV11"), and Device12 ("DEV12").
Misc: indicate assignment of P-Bus ("PBUS"), GPI ("GPI"), and Macro
("MCRO").
Creating and saving a master timeline
To save a master timeline register with the menu, use the following procedure.
1
In the Store menu, using any of the following methods, select the register
in which you want to save the master timeline.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob
1
a) For P-Bus and Device1 to Device12, register numbers 1 to 250 can be set.
2
Press [Edit].
The Edit menu appears, and you can now save the master timeline in the
specified register. In this menu again, you can turn the knob to select the
master timeline register.
The status area shows the status of each region in this master timeline.
3
Using any of the following methods, select the region. Multiple selections
are also possible.
• Press directly on the display in the status area.
• To cancel the selection, press once more to return to the normal display.
• To select all regions, press [ALL].
To select all switcher-related regions (M/E, P/P, User), press [SWR
ALL].
4
Press [Assign], turning it on.
• If the selected register is locked, a confirmation message appears asking
whether or not to cancel the operation. Press [OK] to return to the
previous menu display without carrying out the registration.
Parameter Adjustment
Master Reg Master timeline register
number
Setting values
1 to 99
Creating and Saving a Master Timeline
a)
771