Sony MVS-8000SF User Manual page 282

In 16:9 mode, to crop to 4:3 aspect ratio
In the <Crop Mode> group, press [4:3 Crop], turning it on.
To set the action when a DME wipe crop transition is executed
1
2
3
4
282
Basic Procedure for DME Wipe Settings
Knob Parameter Adjustment
1 H Crop the left and right of the
image
2 V Crop the top and bottom of the
image
3 All Crop the top, bottom, left, and
right of the image
Knob Parameter Adjustment
1 Top Crop the top of the image
2 Left Crop the left of the image
3 Right Crop the right of the image
4 Bottom Crop the bottom of the image
Display indications when multiple channels are selected at the same
time
The indications on the knobs show the settings of the lowest-numbered
channel. When you turn the knobs to adjust the settings, this changes the
settings on the other channels by the same amount.
In the M/E-1 >DME Wipe menu, select HF5 'Modify.'
The Modify menu appears.
Depending on whether the selected pattern is in one-channel mode or two-
channel mode, proceed as follows.
For a pattern in one-channel mode: in the <Ch Select> group, press [1st
Ch], turning it on.
For a pattern in two-channel mode: from the <Ch Select> group, select
the corresponding channels. You can select more than one channel at
the same time.
In the <Crop Mode> group, press [Crop] or [4:3 Crop] (to crop from 16:9
to 4:3 aspect ratio), turning it on.
In the <Crop Mode> group, press [Remove From Begin].
Parameter group [1/2]
Parameter group [2/2]
Setting values
Left value shown
Top value shown
Left value shown
Setting values
–100.00 to +100.00
–100.00 to +100.00
–100.00 to +100.00
–100.00 to +100.00