Relation Between Dme Wipes And Other Effects - Sony MVS-8000SF User Manual

Relation Between DME Wipes and Other Effects

The relations between DME wipes and other effects are as follows.
Relation to ordinary wipes
• DME wipes do not use the wipe generator built into the switcher. Therefore,
during the execution of a DME wipe, you can still use a pattern produced by
the wipe generator as the source for a pattern key or mask.
• A DME wipe pattern cannot be used as the source for a pattern key or mask.
Relation to processed keys
When using the DME for a processed key, if you select a DME wipe, an
available DME is automatically allocated to the DME wipe. If all of the DME
channels are in use, then it is not possible to select a DME wipe.
If in a Setup menu a setting has been made for DME allocation, that Setup
menu setting takes precedence (see "Setting the assignments of DME channels
to use on the individual M/E banks" in Chapter 20 (Volume 3).
Relation to resizer (for MVS-8000G only)
When resizer is enabled, it is not possible to select a DME wipe.
For the key 1 and key 2, or key 3 and key 4 combinations, if one is used for a
dual resizer effect, the other key cannot be used for a DME wipe.
Number of DME wipes that can be used simultaneously on a
single M/E bank
DME wipes can be used in five places, including the four independent key
transitions.
272
Overview
When [Last 5%] is selected, you can set the [Release Transition] as
follows.
• Last 30%
• Last 5%
• Off
Notes
• When pattern numbers 1701 and 1702 are selected, crop cannot be used.
• The MVS-8000 does not support the [Last 5%] setting for [Release
Transition].