Sony MVS-8000SF User Manual page 217

This enables the resizer function.
2
Press [Border/Crop].
The Border/Crop menu appears.
3
Press [Border], turning it on.
This enables the adjustment of crop.
4
Set the parameters.
The valid ranges of the parameter values depend on the combination of
signal format (SD/HD) and aspect ratio (4:3/16:9) selected in the system,
as follows.
• SD format
Knob Parameter
1 H
2 V
3 All
5 Density
• HD format
Knob Parameter
1 H
2 V
3 All
5 Density
To apply color to a border
1
In the <Border Mode> group of the Border/Crop menu, press [Flat Color].
2
Adjust the following parameters.
Knob Parameter
1 Luminance
2 Saturation
Adjustment Setting
Simultaneously adjust width of left
and right borders
Simultaneously adjust width of top
and bottom borders
Simultaneously adjust width of all
four borders
Density of the borders
Adjustment Setting
Simultaneously adjust width of left
and right borders
Simultaneously adjust width of top
and bottom borders
Simultaneously adjust width of all
four borders
Density of the borders
Adjustment Setting
Luminance
Saturation
Values
0.00 to 4.00
0.00 to 3.00 (4:3)
0.00 to 2.25 (16:9)
Value of H shown
0.00 to 100.00
Values
0.00 to 12.00 (4:3)
0.00 to 16.00 (16:9)
0.00 to 9.00
Value of H shown
0.00 to 100.00
Values
0.00 to 100.00
0.00 to 100.00
217
Resizer