Sony MVS-8000SF User Manual page 990

3
4
To initialize the set links
In the Panel >Config >Link/Program Button >External Bus Link >Link Matrix
Adjust menu, press [Init Link Table].
A confirmation message appears.
Press [Yes].
The links set using the above procedure are initialized to the default settings,
and this is reflected in the status area.
Making link bus settings
For the link number selected in the External Bus Link menu, use the following
procedure.
1
2
3
990
Overall Control Panel Settings (Config Menu)
Knob Parameter Adjustment
1 Main No Switcher cross-point button
2 Source No Matrix source selection
To confirm the matrix source selection made in step 2, press [Link Source
Set].
This confirms the selection, which is reflected in the status area.
As required, repeat steps 2 and 3 to select the matrix sources to be linked
to other cross-point buttons.
In the Panel >Config >Link/Program Button >External Bus Link menu,
press [Link Bus Adjust].
The Link Bus Adjust menu appears. The status area lists the current link
status, and the switcher buses and router destinations that can be selected.
In this menu too, you can use knob 1 to select the link to be set.
Using any of the following methods, select the switcher bus and the router
destination to be linked to the switcher bus.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knobs.
Knob Parameter Adjustment
2 Internal Bus Switcher bus selection
3 Destination Router destination selection
To confirm the bus selected in step 2, press [Master Bus Set], and to
confirm the destination press [Linked Dest Set].
Setting values
1 to 128
1 to 128
Setting values
1 to 128
1 to 128