Materials And Parts; Table 3-1 Gi 275 Units; Table 3-2 Gi 275 Connector Kits; Garmin - Garmin GI 275 Installation Manual

3.1 Materials and Parts

Equipment must be sourced from both Garmin and commercial vendors for installation of the GI 275. This
section provides a description of the equipment and the installation kits available from Garmin and also
commercially available parts and their requirements.
3.1.1

Garmin

GI 275 components and applicable installation kits are supplied by Garmin. Refer to the Aviation Price
Catalog on flyGarmin.com
Refer to the latest revision of GI 275 Part 23 AML STC Equipment List (P/N 005-01208-42) for the
approved Mod Status of equipment. Engine sensors with Garmin part numbers listed in Table C-20 are
available from Garmin.
GI 275 Base
GI 275 ADAHRS, Class I & II
GI 275 ADAHRS, Class III & IV
GI 275 ADAHRS+AP, Class I & II
GI 275 ADAHRS+AP, Class III & IV
GI 275 Base NVIS
GI 275 ADAHRS NVIS
GI 275 connector kit (GI 275 Base units)
GI 275 connector kit 2 (GI 275 ADAHRS & AP units)
Configuration Module
KI 256 Adapter Kit
Notes:
[1] The -01 connector kit includes the same parts as the -00 kit, but has additional quantities for the
second connector present on the ADAHRS and ADAHRS+AP models.
[2] Included with -00 and -01 connector kits. Listed for reference only.
[3] Optional adapter for installing a GI 275 in a cutout for a Bendix/King KI 256.
190-02246-10
Rev. 11
for details once the selection for a particular aircraft installation is determined.

Table 3-1 GI 275 Units

Unit

Table 3-2 GI 275 Connector Kits

Connector Kit
Part Number
Unit
011-04489-00 010-01912-00
011-04489-10 010-01912-10
011-04489-30 010-01912-30
011-04489-20 010-01912-20
011-04489-40 010-01912-40
011-04489-60 010-01912-60
011-04489-70 010-01912-70
Part Number
011-04809-00
011-04809-01 [1]
011-04038-00 [2]
011-05285-00 [3]
GI 275 Part 23 AML STC Installation Manual
Catalog
Page 3-2