Eis; Transponder Control; Serial Altitude; Table C-11 Compatible Engine Adapters - Garmin GI 275 Installation Manual

C.10 EIS
The engine adapters listed in Table C-11 are compatible with the GI 275.
Mfr Model
GEA 110
Garmin GEA 24
Other GI 275
Notes:
[1] An external annunciator(s) is required to be configured if the GI 275 EIS is installed outside of 35° of the centerline and is installed as a Primary EIS
display. Refer to Section 4.4.3.
C.11 Transponder Control
The transponders listed in Table C-12 are compatible with the GI 275 for remote transponder control.
Mfr Model
GTX 345
GTX 345R
Garmin
GTX 345D
GTX 345DR
C.12 Serial Altitude (RS-232)
The GI 275 can provide RS-232 serial altitude, Shadin altitude format, 9600 baud, to the systems listed in Table C-13.
Mfr Model
Garmin GTX 3XX
190-02246-10
Rev. 11

Table C-11 Compatible Engine Adapters

Data Format Interfacing Equipment Configuration Information
RS-485
RS-232
HSDB For twin-engine aircraft, configure EIS 2 as Other GI 275.

Table C-12 Compatible Transponders

Data Format Interfacing Equipment Configuration Information
HSDB HSDB Interface page

Table C-13 RS-232 Serial Altitude

Data Format Interfacing Equipment Configuration Information
RS-232 RS-232 Input and Output page
GI 275 software v2.42 or later requires
GEA 110 software v2.21 or later. [1]
Crossfills data from a different GI 275
interfaced to a GEA 24/110. [1]
HSDB INTERFACE: SFD
PRESENT: YES
Set the RS-232 input that is used to
provide altitude to the transponder to
"SHADIN ALT".
GI 275 Part 23 AML STC Installation Manual
Notes
[1]
Notes
Main software v2.60 or
later required.
ADS-B software v3.21 or
later required.
Notes
Page C-16