Table A-1 Gi 275 Unit Connectors; Figure A-1 Gi 275 Connectors - Garmin GI 275 Installation Manual

A.1 GI 275
The GI 275 has up to two D-sub connectors and one BNC connector. The J2752/P2752 connector and pitot
and static fittings are only present on GI 275 ADAHRS and ADAHRS+AP models. Pins relating to
autopilot functionality are not present in the J2752/P2752 connector on the GI 275 ADAHRS
(P/N 011-04489-10 and -30); however, all other pin functions are identical between GI 275 ADAHRS and
ADAHRS+AP models. Refer to Table A-3 for pin function differences between the two models.
The mating designators, part numbers, and associated connector kits are listed in Table A-1.
Ref. Des.
J2751 Conn, Female, HD D-Sub, 78 Ckt
J2752 Conn, Female, HD D-Sub, 78 Ckt
GPS BNC, Male
Notes:
[1] P/N 011-04809-01 kit includes connectors for both J2751 and J2752.
190-02246-10
Rev. 11

Table A-1 GI 275 Unit Connectors

Description

Figure A-1 GI 275 Connectors

(GI 275 ADAHRS shown)
Connector P/N
330-00366-78
330-00366-78
Supplied with antenna
GI 275 Part 23 AML STC Installation Manual
Kit P/N
011-04809-00
011-04809-01 [1]
Page A-2