Garmin GI 275 Installation Manual page 489

Table E-1 Advanced Airframe-Specific Configuration Data – Arc Ranges
Arc Color Description
Overlap between
standard
WHITE/GREEN operational and
flaps operational
ranges
Standard
GREEN
operational range
Caution / smooth
YELLOW air operational
range
Never exceed
speed / max
Vne/Vmo/Mmo operating speed /
max operating
mach number
190-02246-10
Rev. 11
POH/AFM
Section
If a WHITE/GREEN arc is not defined by the AFM/POH
or aircraft specification, set to OFF.
2 - Limitations
If WHITE and GREEN arcs overlap, configure to the
range they overlap within.
If the GREEN arc is not defined by the AFM/POH or
aircraft specification, set to OFF.
If WHITE and GREEN arcs overlap, set Min value to
the Max of WHITE/GREEN.
2 - Limitations
If the YELLOW arc is defined, set to the Min of the
YELLOW arc (Vno).
If the YELLOW arc is not defined, set Max value to
Vno/Vne.
If the YELLOW arc is defined by the AFM/ POH or
aircraft specification, set Min value equal to Maximum
structural speed (Vno).
2 - Limitations
Max value should be configured to Vne or the highest
value of Vne if variable.
If the YELLOW arc is not defined, set to OFF.
If defined as a fixed value, set to Fixed, and enter
POH/AFM defined Vne/Vmo as the Min value.
2 - Limitations
If variable with altitude, set to Variable and set
overspeeds in accordance with Appendix Section E.4.
GI 275 Part 23 AML STC Installation Manual
Notes
Page E-4