Figure 4-16 Eis Caution And Warning Annunciators Installation - Garmin GI 275 Installation Manual

4.4.3.2 Separate EIS Annunciators
The Mil-Spec annunciators must be installed side-by-side with the caution (yellow) annunciator on the left
and the warning (red) annunciator on the right. Install using the following procedure:
1. Drill the cutouts to the dimensions in Figure 4-16.
2. Insert MS25041 assembly without the lens holder from the forward side of the panel and secure.
3. Install lamp on the lens holder.
4. Install and secure lens holder on the indicator.
5. Install a placard or label as outlined in Section 6.6.
1 2 FOR 28V AIRCRAFT
3 4 FOR 14V AIRCRAFT
ITEM OTY PART NUMBER
1 MS25041-4-327
1
2 1 MS25041-2-327
3
1 MS25041-4-330
4
1 MS25041-2-330

Figure 4-16 EIS Caution and Warning Annunciators Installation

190-02246-10
Rev. 11
ANNUNCIATOR, YELLOW, PRESS TO T
28V AIRCRAFT
ANNUNCIATOR, RED, PRESS TO
ANNUNCIATOR, YELLOW, PRESS TO
14V AIRCRAFT
ANNUNCIATOR, RED, PRESS TO
GI 275 Part 23 AML STC Installation Manual
DESCRIPTION
FOR
FOR 28V AIRCRAFT
FOR
FOR 14V AIRCRAFT
Page 4-24