Garmin GI 275 Installation Manual page 227

[2] EIS pages are only available when fully configured in accordance with Section 5.6.
[3] The ADI style is configured on the Airframe Configuration page (refer to Section 5.5.1).
[4] GI 275 MFDs must not display any EIS pages other than the Summary page in twin-
engine EIS installations or installations with more than one primary EIS display.
[5] The Transponder page must be set as the final page, if configured.
5.5.3.6 HSI/Standby ADI Page Options
The HSI/Standby ADI has selectable pages that can be toggled on or off.
NOTE
When configured as a HSI/Standby ADI, the ADI page is always configured on.
• ADI page [1] — Displays pitch, roll, slip/skip, airspeed tape, altitude tape, and optional heading.
• Standard HSI page — Provides magnetically stabilized primary heading.
• Enhanced HSI page — Provides map underlay capable of displaying ownship on a moving map
with traffic and weather overlays.
Notes:
[1] The ADI style is configured on the Airframe Configuration page (refer to Section 5.5.1).
5.5.3.7 GI 275 Normal Mode Page Options
ADI page
Enhanced HSI page
190-02246-10
Rev. 11
CDI page
Traffic page
GI 275 Part 23 AML STC Installation Manual
Standard HSI page
SXM Weather page
Page 5-49