Garmin GI 275 Installation Manual page 225

5.5.3.2 HSI Page Options
The HSI has two selectable pages that can be toggled on or off.
• Standard HSI page — Provides magnetically stabilized primary heading.
• Enhanced HSI page — Provides map underlay capable of displaying ownship on a moving map
with traffic and weather overlays.
5.5.3.3 MFD Page Options
The MFD configuration contains configurable pages from 1 - 17. To configure a page as a certain function,
touch the Page ( ) button and select the desired page from the list. The GI 275 will automatically populate
the maximum number of pages based on the interfaced equipment. To limit the number of displayed pages
in Normal mode, configure unwanted pages to None.
• CDI page — Displays lateral and vertical deviations.
• Standard HSI page — Provides magnetically stabilized primary heading.
• Enhanced HSI page — Provides map underlay capable of displaying ownship on a moving map
with traffic and weather overlays.
• Traffic page [1] — Provides depiction of traffic (ADS-B, TIS-A, TCAS).
• SXM Weather page [1] — Provides depiction of SXM weather (with valid subscription).
• FIS-B Weather page [1] — Provides depiction of FIS-B weather.
• Stormscope page [1] — Provides depiction of lightning strikes.
• Terrain page — Provides depiction of terrain.
• Map page — Displays moving map with ownship icon.
• Gauges Main page [2] [3] — Displays required EIS gauges (Main EIS page in Normal mode).
• Gauges AUX page [2] [3] — Displays additional EIS gauges (AUX EIS page in Normal mode).
• CHT/EGT page [2] [3] — Displays a graph depicting cylinder head temperature and exhaust gas
temperature for each cylinder
• Fuel page [2] [3] — Displays additional fuel data.
• Summary page [2] — Displays supplementary EIS data, such as flight/engine timers and max
temperatures.
• MFD Data page — Displays configurable navigation information. Requires interface to external
navigator to populate information.
• Radio Altimeter page [1] — Displays altitude above terrain.
• Transponder page [1] [4] — Provides control and display of GTX 345 transponders.
Notes:
[1] Page only available when the GI 275 is interfaced to an applicable LRU.
[2] EIS pages only available when fully configured in accordance with Section 5.6.
[3] GI 275 MFDs must not display any EIS pages other than the Summary page in twin-
engine EIS installations or installations with more than one primary EIS display.
[4] The Transponder page must be set as the final page, if configured.
190-02246-10
Rev. 11
GI 275 Part 23 AML STC Installation Manual
Page 5-47