Figure F-20 New Caution Alert With Ongoing Warning Alert; Figure F-21 Varying Gauge Arc - Garmin GI 275 Installation Manual

If an acknowledged Warning alert triangle is currently displayed and a new Caution alert triggers, a
flashing Caution alert triangle will display in place of the Warning alert triangle. Once the Caution alert is
acknowledged, the alert triangle will default to the higher priority non-flashing Warning alert triangle.

Figure F-20 New Caution Alert with Ongoing Warning Alert

Certain gauges (Oil Pressure, Manifold Pressure, and Fuel Pressure) do not trigger alerts until the engine is
started. Gauges with red or yellow markings must be displayed on the Main EIS page. Green, blue, and
white markings do not produce alerts or affect gauge prioritization, and may be shown on the AUX EIS
page.
F.6.2 Gauge with Varying Arc Width
The GI 275 EIS display does not provide varying gauge arc width configuration options, as seen in
Figure F-21. If a gauge that contains a varying arc width is being replaced, it must be configured so that the
arc length is continuous for the intended length of the colored arc. Refer to Figure F-21 as an example.
Varying Gauge Arc Width Continuous Gauge Arc Width
Example Example

Figure F-21 Varying Gauge Arc

190-02246-10 GI 275 Part 23 AML STC Installation Manual
Rev. 11 Page F-12