Figure 4-19 Gsb 15 Cutout Installation - Garmin GI 275 Installation Manual

CAUTION
The instrument panel coating that surrounds the fastener holes and contacts directly with
the GSB 15 unit must be removed prior to installation.
THE AREA ON THE BACK OF THE INSTRUMENT PANEL THAT COMES IN DIRECT CONTACT WITH THE
GSB 15 MUST BE PREPARED FOR ELECTRICAL BOND PER SECTION 4.3.2. PREPARE AREA 0.125 INCHES
1
LARGER THAN THE GSB 15 METAL INSERTS.
ITEM QTY PART NUMBER
010-02201-00, -20, -40 GSB 15, REAR CONNECTOR, UNIT
1 1
010-02201-01, -30, -50 GSB 15, SIDE CONNECTOR, UNIT
MS35214-XX
2 2
MS24693-XX
Notes:
[1] Screws can be substituted by any other suitable pan head or countersink #4-40 UNC-2A
aerospace steel screws.
[2] Torque 0.112-40 UNC-2A screws to 5.0 ± 1.0 in-lbf.
190-02246-10
Rev. 11
INSTRUMENT
PANEL
SCREW, MACHINE, PAN HEAD, CROSS-
[1] [2] RECESSED, BRASS, 0.112-40 UNC-2A
SCREW, MACHINE, FLAT COUNTERSUNK HEAD,
[1] [2] 100°, CROSS-RECESSED, BRASS, #4-40 UNC-2A

Figure 4-19 GSB 15 Cutout Installation

GSB 15 FASTENER HOLE
INSTRUMENT PANEL
REF.
2
DESCRIPTION
GI 275 Part 23 AML STC Installation Manual
1
OR
OR
Page 4-28