Table 5-38 Gdl 69 Configuration Settings - Garmin GI 275 Installation Manual

Part 23 aml stc
Hide thumbs Also See for GI 275:
Table of Contents

Advertisement

Traffic
Type
Source
GTS (HSDB)
Active
GTS 8XX
Traffic
GTS 8XX
(A429)
ADS-B
GTS ADS-B
Avidyne
(Ryan)
Active
TAS 6XX/
TAS 6XX/
Traffic
TCAD
TCAD
GTX 345
ADS-B
GTX 345
GNX 375
ADS-B
GNX 375
GTX 33X
TIS-A
GTX 33X
Notes:
[1] Refer to Section 5.4.19 to configure the ARINC 429 OUT port to provide data to the traffic
system, if applicable.
5.4.14 GDL 69
Configure the data link interface per the settings in Table 5-38.
Data Link
GDL 69/69A
SXM
Notes:
[1] The GI 275 will only display data from the GDL 69/69A SXM. Another LRU must be used
to configure the GDL 69/69A SXM. Refer to GDL 69/69A Installation Manual (P/N 190-
00355-02) for more information.
[2] If a GDL 69A SXM is installed, it is permissible to configure it as a GDL 69. In this case,
the XM weather from the GDL 69A SXM will be displayed on the GI 275 MFD, but no
audio control will be available on the display.
[3] Only second generation GDL 69/69A SXM models are compatible with the GI 275.
190-02246-10
Rev. 11
Interface
Ports/Config - Settings
(Type)
A429 IN [1]
Control Traffic
A429 IN [1]
Active Traffic
A429 IN [1]
TIS STBY/ON

Table 5-38 GDL 69 Configuration Settings

Interface
Ports/Config - Settings
GDL 69
GDL 69A
De-select
TAS STBY/ON
Select
TAS TEST
TAS/TCAS
Port Numbers
GI 275 Part 23 AML STC Installation Manual
Port Numbers
1 Thru 4
Discrete
1 Thru 9
Out Lo
Discrete
1 Thru 9
Out Lo
1 Thru 4
1 Thru 4
Discrete
1 Thru 9
Out Lo
Notes
[1] [3]
[1] [2] [3]
Page 5-31

Advertisement

Table of Contents
loading

Table of Contents