Table C-1 Lru Interface Summary - Garmin GI 275 Installation Manual

Interfaced LRU
G500/G600 (GDU 620)
G500/G600 TXi
GDL 69/69A SXM
GPS 175
GNX 375
GNC 355
GTN 6XX/7XX
GTN Xi
GTS 8X5
GTS 8X0
GTX 33X
GTX 3X5
L-3 Communications
SKY 497
GEA 24
GEA 110
GMC 605
GMC 507
GSA 28
Notes:
[1] G500/G600 TXi software v3.11 or later requires GI 275 software v2.11 or later.
[2] GTX 345 Main v2.60 and ADS-B v3.21 software versions are required for Transponder
Control functionality.
[3] GI 275 software v2.42 or later requires GEA 110 software v2.21 or later.
190-02246-10
Rev. 11

Table C-1 LRU Interface Summary

Min. Software
Needed
• Provides PFD bug sync
v7.40
• Crossfill of GFC 500 display data
v3.02 [1] • Provides air data and heading via crossfill
v5.51 • Weather data
• ADS-B GPS position
v2.02
• GPS NAV source
• ADS-B GPS position
v2.02 • Traffic and weather data
• GPS NAV source
• ADS-B GPS position
v3.01
• GPS NAV source
• ADS-B GPS position
v6.70
• GPS/VHF NAV source
• ADS-B GPS position
v20.10
• GPS/VHF NAV source
• ADS-B GPS position
v3.13
• TAS traffic source
• ADS-B GPS position
v4.13
• TAS traffic source
v2.52 • TIS-A traffic source
• ADS-B GPS position
• Serial altitude
Main: v2.52
• ADS-B traffic source
ADS-B: v3.12
• Weather data (GTX 345 only)
• Mode 3 transponder control (GTX 345 only) [2]
v1.6 • TAS traffic source
v3.60 • EIS
v2.10 [3] • EIS
v2.31 • GFC 600 Autopilot
v2.90
• GFC 500 Autopilot
v4.70
Primary Functions
GI 275 Part 23 AML STC Installation Manual
Page C-2