Garmin GI 275 Installation Manual page 436

Mfr Model
KTA870 / KMH820
Honeywell
(Bendix/King)
KTA970 / KMH920
SKY497
L-3 Communications
(Goodrich)
SKY899
Notes:
[1] The GI 275 provides altitude as part of the data transmitted to the GTX 33( )/330( ); however, it is recommended that a direct connection from the
ADC also be provided so that the GTX 33( )/330( ) will still receive altitude in the event of a GI 275 failure.
[2] Controller type is only required if GI 275 is used to control the traffic system.
[3] Only one ADS-B In source can be configured at a time.
[4] This interface will provide FIS-B weather as well as SXM weather if a GDL 69/69A SXM is also installed.
[5] If the GTS is connected via HSDB, the ARINC 429 interface is not required.
190-02246-10
Rev. 11
Data Format Interfacing Equipment Configuration Information
Intruder File Protocol:
ARINC 429
Controller Type:
Intruder File Protocol:
ARINC 429
Controller Type:
For SKY 497, ARINC 735 Alternate Display type must be set to
ARINC 429
"ARINC735 Type 1" (P1-80 must be grounded).
ARINC 429
ARINC 735
Discrete
ARINC 735
Discrete
GI 275 Part 23 AML STC Installation Manual
Notes
TAS [2]
TCAS I [2]
TAS
SKY 497 software v1.6 or
later required.
TAS/TCAS I
Page C-18