Figure B-6 Analog Cdi Interconnect - Garmin GI 275 Installation Manual

NOTES
THIS INTERCONNECT SHOWS ANALOG NAVIGATION CONNECTIONS. THIS ANALOG INTERCONNECT IS
1
NOT USED IF THE NAVIGATOR IS WIRED USING COMPOSITE OR DIGITAL NAV AS SHOWN IN FIGURE B-5.
IF THE GI 275 IS CONNECTED TO AN AUTOPILOT FOR HEADING AND COURSE ERROR, THE ANALOG
2
NAVIGATION SOURCE CANNOT BE USED. INTERFACE METHODS LISTED IN FIGURE B-5 MUST BE USED.
190-02246-10
Rev. 11

Figure B-6 Analog CDI Interconnect

Sheet 2 of 2
GI 275 Part 23 AML STC Installation Manual
Page B-12